R+F FilterElements logo
All adsorption media
PP

Potassium permanganate media for oxidising gas purification

PP · alumina pellets impregnated with KMnO₄ · loose fill by the kg

Some contaminants are too small or too volatile for activated carbon: hydrogen sulphide, sulphur dioxide, nitrogen oxides, formaldehyde or ethylene. Potassium permanganate does not just hold them – it oxidises them chemically into harmless, solid reaction products.

Potassium permanganate – H₂S, SO₂, NOx, formaldehyde, ethylene and other low-molecular, oxidisable gases.

Removes

H₂S, SO₂, NOx, formaldehyde, ethylene and other low-molecular, oxidisable gases.

Info

Consumed, not regenerable. Colour change purple → brown shows exhaustion.

Typical problems

  • H₂S or SO₂ traces corrode electronics, contacts and instruments
  • Ethylene or formaldehyde that activated carbon cannot hold well
  • Odour-active sulphur compounds in exhaust or recirculated gas

Benefits

  • Captures small, volatile molecules that pass activated carbon
  • Chemical conversion – no desorption when the temperature rises
  • Colour change shows the remaining capacity
  • Ideal as a second layer behind activated carbon in a layered bed

How it works

Porous alumina pellets are impregnated with potassium permanganate, a strong oxidising agent. Oxidisable gas molecules react on the pellet surface and are converted into solid manganese dioxide and salts, which stay in the pellet. As the permanganate is consumed the colour changes from purple to brown.

Example process train

Corrosion protection for instrument or control-room air

Example: air with H₂S/SO₂ traces near process plants feeding sensitive instruments.

1 · Coalescing filter

RF-C element, grade HE (99.99 % @ 0.01 µm)

Removes liquid and aerosol – keeps the pellets free

2 · Layered adsorber

Adsorber housing: activated carbon (CC) + potassium permanganate (PP)

Carbon takes the organics, PP oxidises H₂S, SO₂ and NOx

3 · Particulate after-filter

RF-P element

Retains fines before the instruments

Limits & notes

  • Not regenerable – replace when the pellets have turned brown
  • Strong oxidiser: do not combine with hydrogen, fuel gases or high oxygen concentrations without review
  • Not suitable for liquid water – coalescing filter upstream
  • Suitability for the specific gas on request

Service life depends on load and operating data – figures on request are estimates.

Which medium fits your gas?

Send us gas, flow, pressure, temperature and the contaminant to remove – we propose housing, fill and pre-/after-filters.

Share this page WhatsApp LinkedIn E-mail