Hopcalite catalyst for carbon monoxide removal
HO · manganese / copper oxide catalyst granules · loose fill, on request
Carbon monoxide is odourless, toxic and passes activated carbon practically unhindered. Hopcalite, a mixture of manganese and copper oxides, oxidises CO to CO₂ with the oxygen in the gas – already at room temperature, without heating.

Removes
Carbon monoxide (CO), oxidised to CO₂ with the oxygen contained in the gas.
Info
Catalyst – needs dry gas and oxygen. Poisoned by water and sulphur compounds.
Typical problems
- CO traces in compressed or breathing-quality air from compressor intake or oil degradation
- CO in purge or zero gas disturbs CO analysers
- Activated carbon does not hold CO
Benefits
- Converts CO at ambient temperature – no heater needed
- Removes a contaminant that carbon and desiccants cannot
- Long service life with dry, clean gas
- Combines with a dryer in one refillable adsorber line
How it works
Hopcalite is a porous mixed oxide of manganese and copper. CO and O₂ adsorb on the active surface and react to CO₂, which leaves the bed. The catalyst itself is not consumed as long as it stays dry and clean. Moisture blocks the active sites, so the gas must be dried upstream.
Example process train
CO-free compressed air / zero gas
Example: air supply where CO must be removed for analysers or high-purity use.
1 · Coalescing filter
RF-C element, grade HE (99.99 % @ 0.01 µm)
Removes liquid water and oil aerosol
2 · Dryer
Adsorber with molecular sieve 4A/13X or silica gel
Hopcalite only works with dry gas
3 · Hopcalite bed
Refillable adsorber housing with HO fill
Oxidises CO to CO₂
4 · Particulate after-filter
RF-P element
Retains fines from the catalyst bed
Limits & notes
- Moisture deactivates the catalyst – always dry upstream
- Sulphur and halogen compounds poison the catalyst
- Needs oxygen in the gas; produces CO₂
- Not for hydrogen or fuel gas streams
- Availability, quantity and price on request
Service life depends on load and operating data – figures on request are estimates.
Which medium fits your gas?
Send us gas, flow, pressure, temperature and the contaminant to remove – we propose housing, fill and pre-/after-filters.





