R+F FilterElements logo
Sintered stainless steel and PTFE filter elements for KOH removal from hydrogen engine intake lines
Todas las soluciones
Problema y solución

Hydrogen Injection into Engine Air Intakes — Stopping KOH Carry-Over from On-Board Electrolysers

Small alkaline electrolysers feeding hydrogen into diesel or gas engine intakes carry caustic KOH solution into the lines. A compact two-stage package — liquid knock-out plus KOH-mist stage, optional membrane barrier — keeps the intake and engine free of lye.

Share this page WhatsApp LinkedIn E-mail

Reconocer los síntomas

  • Liquid in the hydrogen line between electrolyser and air intake
  • White deposits or corrosion at the intake filter or manifold
  • Aluminium parts and plastic bowls attacked by caustic solution
  • Foaming or overfilled electrolyte tank precedes liquid events

Causas

Electrolyte carry-over: overfilled tank, foaming, or gas leaving the cell too fast

KOH attacks aluminium, many plastics and Viton seals

No drain point

liquid travels down the line to the engine

Lista de comprobación de diagnóstico

  • 1Stage 1 — liquid knock-out: RF-H-130 (316L, ¼″ NPT, ¼″ NPT drain, solid PTFE gasket) with sintered stainless element RF-SS-25064-025
  • 2Stage 2 — KOH mist: RF-H-130 with sintered PTFE element RF-TF-25064-003 (depth filter, not a fine coalescer)
  • 3Option — final liquid barrier: RF-M-GMS170 PTFE membrane separator
  • 4At 1–2 L/min the pressure drop is far below a 10 psi (0.7 bar) limit; one housing type for all stages
  • 5Sintered elements can be cleaned ultrasonically and reused; keep one spare element per filter
  • 6Field-test first: log ΔP, inspect elements and seals after 4–8 weeks — no lifetime commitment for KOH service; filters are not flame arresters

Describa su situación — encontraremos la solución adecuada

Cada problema de filtración tiene causas específicas que requieren soluciones específicas. Envíenos sus condiciones de operación y elaboraremos una recomendación a medida.