R+F FilterElements logo
Solid PTFE membrane separator for hydrogen with HCl or NaOH droplets
All Solutions
Problem & Solution

HCl or NaOH Droplets in Hydrogen — Filters with PTFE Wetted Parts for Acid and Alkaline Electrolysis

Electrolysis and chlor-alkali test rigs produce hydrogen carrying acid or alkaline droplets. Stainless steel is fine on the alkaline side, but chlorides attack 316L — the acid side needs wetted parts in PTFE. A membrane separator is the last liquid barrier before instruments.

Share this page WhatsApp LinkedIn E-mail

Recognise the Symptoms

  • Corrosion of fittings, valves or sensors downstream of the gas outlet
  • Liquid reaching mass-flow controllers or gas analysers
  • Pitting on stainless steel parts on the acid (HCl) side
  • Viton seals swell or crack in alkaline service

Root Causes

Electrolyte carry-over as droplets and mist from the cell or separator

316L is attacked by chlorides

not suitable for HCl service

Viton (FKM) is not suited to alkaline media

Sintered PTFE is a depth filter

it removes droplets and much of the mist but is not a fine coalescer

Diagnostic Checklist

  • 1Alkaline side: RF-H-132 316L housing (¼″ NPT drain, 100 bar) + RF-TF-25064-003 sintered PTFE element + RF-A-GP130S solid PTFE gasket set
  • 2Acid side (HCl): RF-H-132P housing machined from solid PTFE (max. 7 bar, lower at higher temperature) + RF-TF-25064-003
  • 3Final liquid barrier: RF-M-GMS105P membrane separator, solid PTFE body, hydrophobic PTFE membrane — route the bypass to a closed collection
  • 4Small flows are typical: 20 NL/min at 2 bar(g) is only about 7–8 L/min actual — compact 25 × 64 mm elements are sufficient
  • 5No glass bowls for hydrogen, lye or acid; no float drains venting to atmosphere
  • 6The customer verifies long-term chemical resistance in the test rig — we give no commitment on service life or efficiency in these electrolytes

Describe Your Situation — We Will Find the Right Solution

Every filtration problem has specific root causes that require specific solutions. Send us your operating conditions and we will provide a tailored recommendation.