
Particle Pre-Filter Before the Coalescer — When Two Stages Pay Off and When One Is Enough
A high-efficiency coalescing element is a dense microfibre depth medium. Solids from the pipework block it long before its liquid capacity is used. A low-cost particulate stage in front protects the coalescer — but with clean gas, one stage is often enough.
Recognise the Symptoms
- Coalescer differential pressure rises quickly although little liquid is collected
- Removed coalescing elements are brown or black on the inside (rust, scale)
- Expensive high-efficiency elements are changed far more often than planned
- New pipework or a recent shutdown is followed by short element life
Root Causes
No pre-filtration
solids load the fine coalescing medium and raise ΔP before the liquid separation capacity is used
Wrong order
a particulate filter after the coalescer only makes sense behind dryers or adsorbers that release dust
Dirty sources: new or carbon-steel pipework, compressors, bottle bundles, biogas or upstream processes
Diagnostic Checklist
- 1Two stages per filter point: particulate pre-filter (e.g. RF-P-25178-ST, 95 % @ 0.01 µm) followed by coalescer (RF-C-25178-HE, 99.99 % @ 0.01 µm)
- 2The low-cost particulate element is changed more often; the high-efficiency coalescer lasts significantly longer
- 3With clean grid gas or bottled gas, one coalescing stage is usually enough — the HE coalescer also retains particles down to 0.01 µm
- 4Change elements at 0.7 bar differential pressure, at the latest once a year
- 5Use the same housing type for both stages (e.g. 2 × RF-H-142) — one spare-part type for the whole plant
Find the right filter for this problem
Enter your operating data and let our tools point you to the right element and housing — or send us your details for a tailored recommendation.
Element Finder
RecommendedIdentify the right filter element for your medium and duty in under 60 seconds — recommended starting point.
Find your elementUse Housing Selector
Select the matching housing — material, pressure rating, connections and drain.
Select a housingRequest a Consultation
Prefer a person? Send your operating data and we will recommend the right configuration.
Send enquiryRelated Applications
Describe Your Situation — We Will Find the Right Solution
Every filtration problem has specific root causes that require specific solutions. Send us your operating conditions and we will provide a tailored recommendation.
