R+F FilterElements logo
Earthable 316L stainless steel gas filter housing for use in hazardous areas
All Solutions
Problem & Solution

Gas Filters in Hazardous Areas (ATEX Zones) — Passive Components, Earthing and What You Really Need

Hydrogen, methane and solvent vapours are often filtered inside Ex zones. A filter housing without electrical parts is a passive component — it is not ATEX-certified equipment. What protects you is correct earthing, attention to non-conductive materials and a closed drain concept.

Share this page WhatsApp LinkedIn E-mail

Recognise the Symptoms

  • The plant specification asks for "ATEX-certified filters"
  • Uncertainty whether a plastic or PTFE housing may be used in an Ex zone
  • Float drains vent flammable gas into the zone
  • Electrostatic charging is raised in the safety review

Root Causes

Filter housings have no electrical parts

they are passive components and not ATEX-certified equipment

Non-conductive materials (PTFE, nylon) can accumulate static charge

Uncontrolled release through automatic drains creates a local explosive atmosphere

Diagnostic Checklist

  • 1Use metal housings (316L) where possible — they are conductive and can be bonded and earthed
  • 2With PTFE housings (e.g. for HCl service) bond all metal fittings to earth and assess the charging risk in your safety review
  • 3Route drains to a closed collection system via valves — no float drain venting to atmosphere
  • 4Accessories with electrical function (level switches, ΔP transmitters) must be selected for the zone
  • 5Zone classification and the ignition-risk assessment remain part of the plant operator's safety assessment
  • 6Housings are PED-compliant as supplied; do not weld earthing lugs or flanges onto them

Describe Your Situation — We Will Find the Right Solution

Every filtration problem has specific root causes that require specific solutions. Send us your operating conditions and we will provide a tailored recommendation.