
Refillable Adsorber Housings for Your Own Media — Empty 316L Housings for Gas Purifiers
Specialty gas suppliers and laboratories often use their own adsorbents. Disposable purifier cartridges are expensive and fixed in media. Refillable stainless steel ADS housings are supplied empty and filled with your own pellets — the housing stays, only the media is changed.
Recognise the Symptoms
- Disposable purifier cartridges are expensive and generate waste
- The required adsorbent (special molecular sieve, catalyst, carbon) is not available in a standard cartridge
- Bed volume of the existing purifier is too small — run time too short
- No local stockist for refillable housings
Root Causes
Cartridge purifiers bind you to one medium and one supplier
Run time depends on the contaminant load (e.g. water load), not on the gas flow alone
Pellet size and retaining screen mesh must match, otherwise media fines migrate downstream
Diagnostic Checklist
- 1Sizes (gross volume): RF-H-134-ADS ≈ 110 cm³ (¼″ NPT), RF-H-146-ADS ≈ 265 cm³ (½″ NPT), RF-H-150-ADS ≈ 1.5 L (1″ NPT), RF-H-162-ADS ≈ 2.7 L (2″ NPT)
- 2Pressure: 100 bar (≈ 1450 psi) standard; RF-H-146VP-ADS and RF-H-150VP-ADS 400 bar (≈ 5800 psi), RF-H-150HP-ADS 200 bar (≈ 2900 psi); 200 °C (392 °F)
- 3Send us pellet diameter and length — the retaining screen is matched to your media
- 4Two housings in series let you change the first bed while the second stays in service
- 5Fit a particulate after-filter downstream to catch adsorbent fines
- 6Estimate the media volume with the adsorber sizing calculator — run times are estimates, not guarantees
- 7Direct shipping from Germany by express courier, also to the USA; no local distributor — lead time is confirmed with the quotation
Find the right filter for this problem
Enter your operating data and let our tools point you to the right element and housing — or send us your details for a tailored recommendation.
Element Finder
RecommendedIdentify the right filter element for your medium and duty in under 60 seconds — recommended starting point.
Find your elementUse Housing Selector
Select the matching housing — material, pressure rating, connections and drain.
Select a housingRequest a Consultation
Prefer a person? Send your operating data and we will recommend the right configuration.
Send enquiryRelated Applications
Further Reading
Describe Your Situation — We Will Find the Right Solution
Every filtration problem has specific root causes that require specific solutions. Send us your operating conditions and we will provide a tailored recommendation.
